Get the app
Pythagoras measuring a wooden plank with a folding carpenter’s rule on a sunny building site

A recipe in cups, a board in feet and inches, a drive in hours and minutes: word problems love to mix units. Learn the facts by heart and one rule about when to multiply and when to divide, and most unit questions become one line of arithmetic.

15 min read · 2 sample questions · 12 flashcards · Free

A measurement is a number and a unit

12 feet put into groups of 3: 4 yards. The same length, counted two ways.
In yards4 yd
In feet12 ft
In inches144 in

A unit is a fixed amount you count with: an inch, a pound, a minute. A measurement tells you how many of those units you have. 12 feet means 12 lengths of one foot, end to end. If you change the unit, the number changes, but the length stays the same.

Key idea

Big unit, small number

A yard is bigger than a foot, so you need fewer yards to cover the same distance: 4 yards, but 12 feet. This one idea tells you what to do in every conversion. Going to a smaller unit, the number gets bigger, so you multiply. Going to a bigger unit, the number gets smaller, so you divide.

Next: Learn

How to convert units

  1. 1

    The facts to know by heart

    In the United States, everyday life uses U.S. customary units: inches and miles for length, ounces and pounds for weight, cups and gallons for liquids. Each fact below says how many of a small unit make one big unit. Learn them the way you learned your phone number. You cannot convert what you do not know.

    Length
    One of theseequals
    1 foot (ft)12 inches (in)
    1 yard (yd)3 feet, or 36 inches
    1 mile (mi)5,280 feet, or 1,760 yards
    Time
    One of theseequals
    1 minute (min)60 seconds (s)
    1 hour (h)60 minutes
    1 day24 hours
    1 week7 days
    Weight
    One of theseequals
    1 pound (lb)16 ounces (oz)
    1 ton2,000 pounds
    Liquids
    One of theseequals
    1 pint (pt)2 cups
    1 quart (qt)2 pints
    1 gallon (gal)4 quarts
    Shortcut

    Doubles, then 4

    Liquids go cup, pint, quart in doubles (2 and 2), then 4 quarts make a gallon. The name helps: a quart is a quarter of a gallon.

    Next step: Multiply or divide
  2. 2

    To a smaller unit, multiply. To a bigger unit, divide.

    to a smaller unit: × to a bigger unit: ÷

    Before you calculate, ask one question: is the new unit bigger or smaller? A smaller unit fits more times, so the answer is a bigger number: multiply by the fact. A bigger unit fits fewer times, so the answer is a smaller number: divide by the fact.

    1. 6 yd
    2. 6 × 3 ft
    3. 18 ft
    Each yard is replaced by 3 feet. Feet are smaller, so the number grows.
    Example

    6 yards in feet

    1. A foot is smaller than a yard, so there will be more feet than 6. Multiply.
    2. Each yard is 3 feet: 6 × 3 = 18.

    Answer 18 feet

    Example

    80 ounces in pounds

    1. A pound is bigger than an ounce, so there will be fewer pounds than 80. Divide.
    2. Each pound is 16 ounces: 80 ÷ 16 = 5, because 5 × 16 = 80 (5 × 10 = 50 and 5 × 6 = 30).

    Answer 5 pounds

    Next step: Two steps
  3. 3

    No single fact? Go through the units in between

    No fact links hours and seconds directly in the table. So walk through the unit in the middle, one fact at a time. Rewrite the whole amount at each step, so you always know what unit you are holding.

    1. 2 hours
    2. 2 × 60 minutes
    3. 120 minutes
    4. 120 × 60 seconds
    5. 7,200 seconds
    Hours to minutes, then minutes to seconds. Both steps go smaller, so both multiply.
    Example

    5 gallons in cups

    1. Gallons to quarts: 5 × 4 = 20 quarts.
    2. Quarts to pints: 20 × 2 = 40 pints.
    3. Pints to cups: 40 × 2 = 80 cups.

    Answer 80 cups

    Shortcut

    1 gallon is 16 cups

    4 quarts, each 2 pints, each 2 cups: 4 × 2 × 2 = 16. So 5 gallons is 5 × 16 = 80 cups in one step.

    Next step: Mixed units
  4. 4

    Mixed units like 5 ft 9 in

    A mixed unit uses two units at once: 5 ft 9 in means 5 feet plus 9 inches. To work with it, change all of it into the smaller unit first.

    1. 5 ft 9 in
    2. 5 × 12 in + 9 in
    3. 60 in + 9 in
    4. 69 in
    The feet become inches; the 9 inches stay as they are.

    To go back, divide by the fact. The whole number of times it fits is the big unit, and what is left over, the remainder, is the small unit.

    Example

    100 inches in feet and inches

    1. 12 fits into 100 eight times: 8 × 12 = 96. Nine times would be 108, too much.
    2. Left over: 100 − 96 = 4 inches.

    Answer 8 ft 4 in

    Example

    3 h 45 min + 2 h 30 min

    1. Hours with hours: 3 + 2 = 5. Minutes with minutes: 45 + 30 = 75.
    2. 75 minutes is more than an hour. Take one hour out: 75 − 60 = 15.
    3. 5 h 75 min becomes 6 h 15 min.

    Answer 6 h 15 min

    Next step: Rates
  5. 5

    The conversion factor: a fraction worth 1

    A conversion factor is a fact written as a fraction, like 1 hour over 60 minutes. The top and the bottom are the same amount of time, so the fraction is worth exactly 1, and multiplying by 1 never changes an amount. Put the unit you want to get rid of on the bottom: it cancels with the same unit on top.

    1. 90 min
    2. 90 min × 1 h / 60 min
    3. 90 ÷ 60 h
    4. 1.5 h
    Minutes on top and minutes on the bottom cancel. Hours are left. For 90 ÷ 60: 60 fits once, with 30 minutes left, and 30 minutes is half an hour: 1.5 h.

    This matters most for rates, numbers with “per” in them: dollars per ounce, miles per hour. A rate has two units, and you may need to change one of them.

    Example

    Rice costs $0.15 per ounce. What is the price per pound?

    1. A pound is 16 ounces, so one pound costs 16 times as much as one ounce.
    2. Split 16 into 10 and 6: 10 × 0.15 = 1.50 and 6 × 0.15 = 0.90.
    3. 1.50 + 0.90 = 2.40.

    Answer $2.40 per pound

    Shortcut

    60 mph is 1 mile a minute

    An hour is 60 minutes, so 60 miles per hour is exactly 1 mile per minute. Then 45 mph is 3/4 of a mile per minute, and 90 mph is 1.5 miles per minute.

    Next step: Metric
  6. 6

    Metric units: kilo, centi and milli

    The metric system is used in science, in medicine and in most countries. It has one base unit for each thing: the meter for length, the gram for weight and the liter for liquids. A prefix, a piece in front of the name, makes it bigger or smaller by a power of 10. So converting is just moving the decimal point.

    Three prefixes
    PrefixMeansExample
    kilo-1,0001 kilometer = 1,000 meters
    centi-1/1001 meter = 100 centimeters
    milli-1/1,0001 liter = 1,000 milliliters
    Kilometers to meters

    2.5 km

    Smaller unit, so × 1,000: the point moves 3 places right. 2,500 m

    Centimeters to meters

    340 cm

    Bigger unit, so ÷ 100: the point moves 2 places left. 3.4 m

    Milliliters to liters

    750 mL

    Bigger unit, so ÷ 1,000: 3 places left. 0.75 L

    Shortcut

    Count the zeros

    Kilo means 1,000 and milli means 1/1,000. Both have three zeros, so move the point three places. Centi means 1/100: two zeros, two places.

    Next step: Three examples
  7. 7

    Three worked examples, from easy to test level

    Each one starts with the first try many people make, crossed out, and then the way that works. Read the wrong try too: it is the kind of answer the test puts in the choices.

    The test-level one needs three conversions in a row and then a division. Write the unit next to every number: if the units in a step do not match, you have found the mistake.

    Example · Easy

    How many ounces are in 6 pounds?

    First try6 ÷ 16 = 0.375 ounces

    1. An ounce is smaller than a pound, so there must be more ounces than 6. The first try divided and got less than 1.
    2. Going to the smaller unit, multiply by 16.
    3. Split the 16 into 10 and 6: 6 × 10 = 60 and 6 × 6 = 36.
    4. 60 + 36 = 96.

    Answer 96 ounces

    Example · Medium

    A movie is 135 minutes long. How long is that in hours and minutes?

    First try135 ÷ 60 = 2.25, so 2 h 25 min

    1. 2.25 hours is right, but the .25 is a part of an hour, not 25 minutes.
    2. 0.25 of an hour is a quarter of 60 minutes, which is 15 minutes.
    3. Or skip the decimal: 2 × 60 = 120, and 135 − 120 = 15 minutes left over.

    Answer 2 h 15 min

    Example · Test level

    A field kitchen makes 6 gallons of soup. Each bowl holds 1 1/2 cups. How many bowls can it fill?

    First try6 × 4 = 24 quarts, so 24 ÷ 1.5 = 16 bowls

    1. The first try divided quarts by cups. The units do not match, so convert all the way to cups.
    2. Gallons to quarts: 6 × 4 = 24 quarts. Quarts to pints: 24 × 2 = 48 pints. Pints to cups: 48 × 2 = 96 cups.
    3. Two bowls use 1 1/2 + 1 1/2 = 3 cups. 96 ÷ 3: 3 × 30 = 90 and 3 × 2 = 6, so 3 × 32 = 96: 32 pairs of bowls.
    4. 32 pairs is 32 × 2 = 64 bowls.

    Answer 64 bowls

Next: Watch out

4 traps in the answer choices

The test writes its wrong answers on purpose: each one is what you get if you make one of these mistakes.

Trap

Multiplying when you should divide

Changing 48 ounces to pounds:

Wrong48 × 16 = 768 pounds

Right48 ÷ 16 = 3 pounds

Trap

Reading decimal hours as minutes

Writing 3.4 hours in hours and minutes:

Wrong3.4 hours → 3 h 40 min

Right0.4 × 60 = 24 → 3 h 24 min

Trap

Writing feet and inches as a decimal

Writing 5 ft 6 in in feet:

Wrong5 ft 6 in → 5.6 feet

Right6 ÷ 12 = 0.5 → 5.5 feet

Trap

Stopping halfway

Changing 3 gallons to cups:

Wrong3 × 4 = 12 cups

Right3 × 4 × 2 × 2 = 48 cups

Next: Practice

Try 2 questions

Two sample questions on this topic. Pick an answer, then read why. All the practice for this topic is in the Study Hall.

On test day

Units show up inside Arithmetic Reasoning word problems: a recipe in cups, a board in feet and inches, a drive in hours and minutes. On the computer test that section has 15 questions in 55 minutes; on paper, 30 questions in 36 minutes. Mathematics Knowledge (15 questions in 31 minutes on the computer, 25 in 24 minutes on paper) can need units too.

No calculator. Before you multiply or divide, ask which unit is bigger. If the answer is in a smaller unit, it must be a bigger number. That one check can rule out choices before you calculate.

On the computer test you cannot go back to a question. Write the unit next to every number as you work, and change everything into the same unit before you add, subtract or divide.

Question 1 of 2 · Warm-up

How many inches are in 7 feet?

Show the answer

D. An inch is smaller than a foot, so the number must get bigger: multiply. Each foot is 12 inches: 7 × 12 = 84. 0.58 divides instead (7 ÷ 12), 19 adds 12, and 21 uses 3, the feet in a yard. 7 feet is 84 inches.

Question 2 of 2 · Warm-up

How many pounds are in 3 tons?

Show the answer

C. A ton is 2,000 pounds, and a pound is the smaller unit, so multiply: 3 × 2,000 = 6,000. 48 uses 16, the ounces in a pound; 2,003 adds instead of multiplying; and 96,000 keeps going past pounds into ounces (3 × 2,000 × 16). The question asks for pounds, so stop there. 3 tons is 6,000 pounds.

The Study Hall

Practice this topic for real

The full lesson in the ASVABIFY Community: more practice questions with every answer explained, and a checkpoint that tells you when you have it. Reading is free with an account; all the practice comes with Study Hall Plus, and it is included with Pro.

Practice in the Study Hall Stuck on one? Ask in #questions, free
Next: Flashcards

12 flashcards

Tap a card to flip it. Keep the ones you miss until they stick.

12 cards
Lesson complete

You finished this lesson: Units and measurement.

Practice score: not taken yet Take the practice

End of Foundations. Take the part test Course map
In the app

See this topic move.

In the course, every topic is drawn step by step on a whiteboard while a voice explains it, with timed practice tests and a plan for your test date. The first lessons of every module are free.

Try the app free